flexsim中导入AutoCAD图形（二）
上次为大家介绍了关于导入CAD图形的前期操作，接下来就为大家继续介绍如何导进Flexsim中。
Last time, I introduced the preliminary operation of importing CAD graphics for you. Next, I will introduce how to import into Flexsim.
首先，在工具箱板块中，点击加号选择可视化设置，选择模型背景。
First, in the Toolbox pane, click the plus sign to choose Visualization Settings, and choose Model Background.
选择文件后，会出现坐标位置选择，有的时候会自动出现对应的坐标初始位置，这是跟flexsim中心相对应的，当然你也可以设置初始位置为（0，0，0），本案例就选择提供坐标了。
After selecting the file, the coordinate position selection will appear, and sometimes the corresponding initial position of the coordinates will automatically appear, which corresponds to the center of flexsim. Of course, you can also set the initial position to (0, 0, 0), this case is Choose to provide coordinates too.
还可以设置导入后文件的颜色设置，可以自己更改使其在Flexsim中显示更加突出
You can also set the color settings of the imported file, you can change it yourself to make it more prominent in flexsim
还可以选择吸附到网络
You can also choose to snap to the network
那么这样我们就得到了导入之后的模型背景。我们会发现其中心与模型中心几乎对应。
Then we get the model background after importing. We will find that its center almost corresponds to the model center.
以上就是向Flexsim中导入AutoCAD图形的全部过程。
The above is the whole process of importing AutoCAD drawings into Flexsim.
但是在导入的时候经常会出现一些故障，那么接下来就为大家介绍一下常见问题的解决方法。
However, there are often some failures when importing, so the following will introduce the solutions to common problems for you.
1、AutoCAD图形不可见
AutoCAD graphics are not visible
要解决此问题，需确保
To resolve this issue, make sure
①在背景的“属性”窗口的“图层”选项卡中，确保将“可见性”按钮设置为显示图形中的每个图层。
In the Layers tab of the Properties window for the background, make sure the Visibility button is set to show every layer in the drawing.
在后台的属性窗口的背景选项卡上，确保发光框被选中。
On the Background tab of the Properties window in the background, make sure the Glow box is checked.
②第二个原因可能是因为CAD文件的原点与实际图形也就是flexsim中心点相距甚远，这个可以通过缩放Flexsim视野找到图形，并根据之前设置的坐标进行调整。
The second reason may be because the origin of the CAD file is far away from the actual graphic, that is, the center point of flexsim. This can be found by zooming the Flexsim field of view and adjust it according to the previously set coordinates.
③还需要保证flexsim的全局设置中的显卡设置不是现代模式，而是前面的两种模式之一。
It is also necessary to ensure that the graphics card setting in the global settings of flexsim is not the modern mode, but one of the previous two modes.
2、没有出现参考其他文件的AutoCAD文件
There is no AutoCAD file that references other files
一些AutoCAD文件包含对其他AutoCAD图形的引用，因此需要确保所引用的文件与AutoCAD文件包含在同一个文件夹中。
Some AutoCAD files contain references to other AutoCAD drawings, so you need to make sure the referenced files are contained in the same folder as the AutoCAD files.
参考资料：《Flexsim中文用户手册》
哔哩哔哩，轮回Lumir，《干货小技巧04——CAD图纸导入全流程讲解》
本文由LearningYard新学院原创，若有侵权，请联系删除。
,
