论文排版——参考文献引用
论文中的参考文献引用指在论文正文中引用某些文献中的内容时，要为这些被引用的内容添加上标，并在文末“参考文献”里用对应的标号指出被引用的内容来自哪篇文献。
Reference citation in the paper means that when citing the content of some literature in the main body of the paper, superscript should be added to the cited content, and the corresponding label should be used in the "References" at the end of the text to indicate where the cited content comes from. articles.
而在进行参考文献引用时，一般都是在论文正文完成后，首先在文末的“参考文献”里对文献设置自动编号，再在正文里面添加文献引用的上标。
When citing references, generally after the text of the paper is completed, first set the automatic numbering of the literature in the "References" at the end of the paper, and then add the superscript of the citation in the text.
因此，第一步：在文末的“参考文献”里添加论文用到的参考文献，参考文献要设置自动编号。点击“段落”的“编号”：
Therefore, the first step: Add the references used in the paper in the "References" at the end of the article, and the references should be automatically numbered. Click "Numbering" of "Paragraph":
选择“编号”里的“定义新编号格式”：
Select "Define new numbering format" in "Numbering":
设置合适的编号格式：包含序号（阿拉伯数字或其他）的英文中括号：
Set the appropriate numbering format: English square brackets containing serial numbers (Arabic numerals or other):
输入论文引用的参考文献（每输入完一篇文献回车，便生成自动编号，继续输入下一篇文献）：
Enter the references cited in the paper (every time you enter a literature and press Enter, an automatic number will be generated, and you will continue to enter the next literature):
接下来就是在文中添加文献引用：把输入光标移到正文中引用的第一篇文献的内容后，并在“引用”选项卡下点击“交叉引用”：
The next step is to add literature citations in the text: move the input cursor to the content of the first literature cited in the text, and click "Cross References" under the "Citations" tab:
选择文献的序号然后点击“插入”：
Select the serial number of the article and click "Insert":
最后把这个标号设置为“上标”即可，其他的参考文献引用相同：
Finally, set this label to "superscript", and other references are cited the same:
提示：在把这些代表参考文献引用的标号设置为上标时可以使用“替换”功能，可以一次性把所有的标号设置为上标。
Tip: You can use the "Replace" function when setting these symbols that represent reference citations as superscripts, and you can set all the symbols as superscripts at once.
然而，有时我们会在已经排好顺序的参考文献里插入其他的参考文献：
However, sometimes we insert other references into the already ordered references:
此时插入的参考文献之后的参考文献的标号就发生了变化，此时只需要全选文章正文，然后点击“更新域”即可，文中已经设置为上标的标号会自动更新：
At this time, the labels of the references after the inserted references have changed. At this time, you only need to select all the text of the article, and then click "Update Field". The labels that have been set as superscripts in the text will be automatically updated:
本文由learningyard新学苑原创，如有侵权，请联系我们
翻译来源于谷歌翻译
图片来源于百度
,
