1、首次使用时，使用网线将设备接口（加入SVI 相应vlan）与管理设备的网口相连先为接口 设置IP地址，下面我们就来聊聊关于怎么看锐捷版本 锐捷RGOS-锐捷系统升级操作?接下来我们就一起去了解一下吧!
怎么看锐捷版本 锐捷RGOS-锐捷系统升级操作
1、首次使用时，使用网线将设备接口（加入SVI 相应vlan）与管理设备的网口相连。先为接口 设置IP地址。
Ruijie>enable ------>进入特权模式
Ruijie#configure terminal ------>进入全局配置模式
Ruijie(config)#interface vlan 1 ------>进入vlan 1接口
Ruijie(config-if)#ip address 192.168.1.1 255.255.255.0 ------>为vlan 1接口上设置管理 ip
Ruijie(config-if)#exit ------>退回到全局配置模式
2、确认交换机及管理设备上均开启telnet登录。
3、使用SVI口管理设备或升级设备时，使用电脑 telnet登录到管理设备上。
4、确认电脑能ping通交换机，交换机也能ping通电脑
Ruijie#ping 192.168.1.2 ------>交换机ping服务器IP可通
Sending 5, 100-byte ICMP Echoes to 172.18.62.44, timeout is 2 seconds:
< press Ctrl C to break >
!!!!!
注意：电脑自带的防火墙功能要关闭，并且要退出杀毒软件，否则可能导致无法
升级成功
5、确认当前的软件版本信息
Ruijie#sh version
system software version ：（版本信息）
4、将tftp软件（tftp软件可以从网上自行下载）及新的软件版本放入同一个目录（建议是英文路径，不建议放入中文文件夹，否则可能导致无法升级成功）。开启tftp工具，将升级文件拷贝到设备上
Ruijie #copy tftp://192.168.1.2/S2900G-E_10.4(2b12)p6_R196987_install.bin
flash:/rgos.bin
Accessing tftp://192.168.1.2/S2900G-E_10.4(2b12)p6_R196987_install.bin...
System is running defragment,please wait....
Press Ctrl C to quit
...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!
Transmission finished, file length 13143392 bytes.
Verify the image .....[ok]
CURRENT PRODUCT INFORMATION :
PRODUCT ID: 0x20140061
PRODUCT DESCRIPTION: Ruijie Full Gigabit Security & Intelligence Access Switch
(S2952G-E) By Ruijie Networks
SUCCESS: UPGRADING OK..
5、重启设备后，执行 show version 命令，查看当前软件版本，确认升级成功。
Ruijie#show ver
System description: Ruijie Full Gigabit Security & Intelligence Access Switch
(S2952G-E) By Ruijie Networks
System start time : 2007-05-13 3:23:50
System uptime : 0:0:3:56
System hardware version : 1.00
System software version :RGOS 10.4(2b12)p6 Release(196987)
System BOOT version : 10.4(2b12)p6 Release(192433)
System CTRL version : 10.4(2b12)p6 Release(192433)
Device information : Device-1
Hardware version : 1.00
Software version : RGOS 10.4(2b12)p6 Release(196987)
BOOT version : 10.4(2b12)p6 Release(192433)
CTRL version : 10.4(2b12)p6 Release(192433)
Main程序的版本号为10.4(2b12)p6 Release(196987)，升级成功。
,
