Step1：先进行“分节符设计”中的分节操作后，点击插入后点击页眉和页脚。（PS：可以方便之后对论文排版的按节操作，如：目录不需要页码等）
Step1: After performing the section operation in "Section Break Design", click Insert and then click the header and footer. (PS: it can be convenient for the section-by-section operation of the paper layout later, such as: the table of contents does not need page numbers, etc.)
Step2：点击页眉页脚选项，勾选“奇偶页不同”、“显示奇数页页眉横线”、“显示偶数页页眉横线”。
Step2: Click the header and footer options, check "Odd and even pages are different", "Show odd page header horizontal line", "Show even page header horizontal line".
偶数页居中对齐为“某大学本科毕业设计（论文）”，奇数页居中对齐是各章章名；字体采用宋体5号。
Step3：设置字体选中，后直接修改字体格式。
The center alignment of even pages is "a university undergraduate graduation design (thesis)", and the center alignment of odd pages is the title of each chapter; the font adopts Song font No. 5.
Step3: Set the font to select, and then directly modify the font format.
Step4：各页对齐选中“插入对齐制表位”，在“对齐基准”中进行选择对齐基准操作。
Step4: Insert Alignment Tab Stop is selected for each page alignment, and the Alignment Datum operation is selected in Align Datum.
页脚放置页码，页码在边线之下隔行居中放置；摘要、目录、图录、表录、注释表等文前部分的页码用罗马数字单独编排，正文以后，从引言开始的页码用阿拉伯数字连续编排。
页脚放置页码，且居中放置。
Step1：点击插入，再点击页码，最后点击页脚中间。
The page numbers are placed in the footer, and the page numbers are interlaced and centered below the edges; the page numbers of the first parts of the abstract, table of contents, catalogues, tables, notes tables, etc. are arranged separately in Roman numerals, and after the main text, the page numbers starting from the introduction are arranged continuously in Arabic numerals.
The footer places the page number, and it is centered.
Step1: Click Insert, then the page number, and finally the middle of the footer.
摘要、目录、图录、表录、注释表等文前部分的页码用罗马数字单独编排。
Step2：点击页码，选择最下方的页码。
The page numbers of the first parts of the abstract, table of contents, catalogue, annotation table, etc. are arranged separately in Roman numerals.
Step2: Click the page number and select the bottom page number.
Step3：根据Step2的操作就可以看到“下图”，根据要求就可以设置我们所需要的页码了。通过分节符的设置，对每一节的格式进行设置。
Step3: According to the operation of Step2, you can see the "following figure", and we can set the page number we need according to the requirements. The format of each section is set by setting the section break.
其意义就是方便对每一节做独立的操作，主要是服务于页眉页脚的设计操作。
Step1：点击左上角的“分页”后，再选择“下一页分节符”，可以实现分节。
Its significance is to facilitate the independent operation of each section, mainly to serve the design operation of the header and footer.
Step1: Click "Pagination" in the upper left corner, and then select "Next Page Section Break" to achieve sectioning.
分节后，封面和摘要就都可以避免同时设置页码了。
做上图操作之后，就会出现一个空白图，此空白图不是单纯的空白，而是我们需要的下一节的开始。
After sections, both the cover page and the summary can avoid setting page numbers at the same time.
After doing the above image, a blank image will appear, which is not simply blank, but the beginning of the next section we need.
图表目录设计（以图设计为例）：
Step1：图片的目录插入，如下图所示，点击“下一页分节符”。（PS：可以实现论文排版的“分节”，使得图目录与文字目录有根本的区别）。
Step1: Insert the table of contents of the picture, as below screenshot shown, click "Next Section Break". (PS: it is possible to realize the "subsection" of the paper layout, so that the picture directory is fundamentally different from the text directory).
Step2：点击“引用”，再点击“插入表目录”。
Step2: Click "References" and then "Insert Table Of Contents".
Step3：点击“图”，可以选择制表符，而后就可以得到需要的图目录了。（根据需要选择其他的的标签，所以表目录的设计与图目录的设计相同）。
Step3: Click "Figure", you can select the tab, and then you can get the desired graph directory. (Select other tags as needed, so the design of the table directory is the same as the design of the diagram directory.)
得到的目录不是我们需要的，那就点击目录，参考标题修改方式即可。
The resulting table of contents is not what we need, then click on the table of contents and refer to the title modification method.
制作|黄国琦
审核|王柯杰
翻译|Google翻译
声明|本文部分素材来自网络，要有侵权请联系删除
,
